COIA's wide range of coatings with an annual capacity 5,000 Tons consists in particular of:

NEW:
UV Curable Galaxy® High Performance High Temperature HPHTC 250 Primary & Secondary Coatings for High Temperature Optical Fibre Manufacturing, temperature range -40 °C up to +250 °C.

UV Curable Galaxy® High Performance HPC 7 Primary & HPC 8 Secondary Coatings as well as Galaxy® HPC 8 Rainbow (12 different colour shades) for Standard Optical Fibre Manufacturing, temperature range -60 °C to +85 °C.

NEW:
Galaxy® MCI 2500 High Speed UV-Inks have been specifically developed for colour-coding of optical fibres with a higher processing speed ( fast cure response ) due to High Flow Additives and giving a higher intensity & brightness of the colour shade on the fibre. Furthermore the typical odour has been reduced to a minimum. Galaxy® MCI 2500 High Speed UV-Inks are according to IEC 60304, EIA/TIA-Munsell and according to ”Deutsche Telekom” F.T.Z. standards.

Galaxy® MCI 2500 High Speed UV-Ink is the successor of the world wide known and accepted Galaxy® MCI 2000 UV Ink, which is a result of a over 15 years experience in the manufacturing and processing of UV-Inks & Coatings.

Since April 2007 our new Galaxy® MCI 2500 High Speed UV-Ink has fully replaced the former Galaxy® MCI 2000 UV Ink series.

Galaxy® MCI 2500 High Speed UV Inks are available in 12 bright & glossy standard Colours as well as Colourless (Clear - 513). Additional 11 Special Colours to complete 24 Colour shades are available.

Alternatively, with our long experience in manufacturing and processing UV-Inks, we can also meet customer specific requirements, such as High Viscous, special Colour shades, etc.

UV Curable Galaxy® CRB One Step for Easy Strip Single Layer Tight Buffer and Easy Strip Single Layer Micro Bundle (only low modulus).

UV Curable Galaxy® C Inner Slippy, Galaxy® CRB Outer Transparent and Galaxy® CRB Outer Rainbow (12 different colour shades) Coating Resins for Easy Strip Tight Buffering of Optical Fibres (low, medium or high modulus).

UV Curable Galaxy® MRR One Step Matrix Resin for Single Layer Optical Fibre Ribbon.

UV Curable Galaxy® MRR Inner 250-300, Galaxy® MRR Outer 300-400 transparent and Galaxy® MRR Outer 300-400 Rainbow (12 different colour shades) Matrix Resins for Easy Peel Optical Fibre Ribbon.

UV Curable Galaxy® CRAS-Series Coating Resins for Anti-Scratch as plastic (PC, PS, PMMA, …etc.) and wood surface protection.

UV Curable Galaxy® CRAS-Series Coating Resins for Anti-Scratch as glass and metal surface protection.

Our UV-inks & Coatings are used by over 60 Customers World-Wide in Japan, China, Middle & Far East, Europe and USA with big success.

COIA is supplying Inks and Coatings in the following packaging sizes:
1 kg - 10 kg - 200 kg - 600 kg - 800 kg - 1.000 kg - 1.200 kg.